Published at Saturday, December 09th, 2017 - 23:29:52 PM. . By Lela Kaufman.
Mixing the Cerlon with the paddle causes heat to start to build up in the mixture. Heat causes the Cerlon to set. Using a heat gun you need to get the temperature up to about 80 to 90 degrees before you pour it into the area that needs to be repaired. Once it reaches 100 degrees you have only about 10 minutes to finish the patch with a trowel.
Tools needed: FlexSet A push broom or blower Drill Trowel or Lute - First ensure that the damaged area is clean and dry. Sweep or blow out cracks so there is no loose debris. Using Roklins FlexSet Concrete Repair Product, carefully pour contents of bottle \"a\" into provided 5-gallon bucket then add special sand. Next, shake thoroughly and pour bottle \"b\" into sand mixture. Mix with a paddle-mixer, using a drill. When mixture is completely wet, pour FlexSet onto damaged area and use a trowel or lute to smooth material into cracks. When damage is sufficiently smooth, toss topping sand by hand over repaired area to create a uniform look and feel. Your driveway can be ready for vehicles in about an hour.
Any content, trademark’s, or other material that might be found on the CoolAt website that is not CoolAt’s property remains the copyright of its respective owner/s. In no way does CoolAt claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 CoolAt. All Rights Reserved.