Published at Monday, April 09th, 2018 - 04:45:52 AM. . By Kathleen Fields.
The next step is mixing the Cerlon. This is done in 5 gallon buckets using the buckets that the Cerlon comes in take and pour ½ of the Cerlon in a clean bucket and mix the product half at a time. The most important part of mixing Cerlon is the ratio of water to the Cerlon has to be measured very accurately. A paddle on an electric drill that you use from mixing taping compound or floor leveler can be used to mix the Cerlon.
If the existing floor surface needs to be solidified and densified, the contractor might apply penetrating hardeners to the concrete. This usually happens after first stage of the grinding process. The hardeners can be used on both existing or new floors and react chemically with the concrete to result in a hard crystalline structure. In addition, the hardeners offer extra protection from staining and water penetration and also prevent the concrete dusting.
Any content, trademark’s, or other material that might be found on the CoolAt website that is not CoolAt’s property remains the copyright of its respective owner/s. In no way does CoolAt claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 CoolAt. All Rights Reserved.