Published at Monday, April 09th, 2018 - 04:45:52 AM. . By Kathleen Fields.
If the existing floor surface needs to be solidified and densified, the contractor might apply penetrating hardeners to the concrete. This usually happens after first stage of the grinding process. The hardeners can be used on both existing or new floors and react chemically with the concrete to result in a hard crystalline structure. In addition, the hardeners offer extra protection from staining and water penetration and also prevent the concrete dusting.
However dont believe that this is your lone alternative in decorative concrete. You could also decide to shine your cement with grinders that contain grits and diamond pads. Most concrete floor will tolerate a grit of 800. At least one technique is to add Sodium Silicate or Lithium Silicate to the cement while it solidifies which will boost the capability to add gloss and grit with the polished off cement. Immediately following numerous stages with the grinders you should have a glassy and smooth finish to the cement. Dye coloring might be added throughout the polishing stage which will make for a very decorative cement finish.
Any content, trademark’s, or other material that might be found on the CoolAt website that is not CoolAt’s property remains the copyright of its respective owner/s. In no way does CoolAt claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 CoolAt. All Rights Reserved.