Published at Monday, December 11th, 2017 - 20:58:52 PM. . By Ashlee Ashley.
The next operation was using a hilt chipping hammer to remove all the concrete between the scores down ¾ of an inch so that the Cerlon can be poured at least ¾ of an inch thick. Only a ½” of Cerlon is needed to make the area impervious to the salt, but we figure that we go to ¾ of an inch to make sure the salt will not affect our repair. Once this is done and the spoilage is removed the concrete has to be cleaned and remove as much of the dust as possible. Cerlon will chemically bond with the concrete so you do not need to put any product as a bonding agent as you do with concrete.
As a final point, dont disregard that cement can also be engraved, whereby the actual bare cement is provided a facelift. Etching grooves and lines into the top of the bare cement can produce geometric behaviours, straight or curved lines, as well as custom layouts. Be sure to keep nearby when the specific color is being combined so you are sure its what you desire, particularly if the task needs a couple of truckload of concrete. Do not forget that the finished concrete may not be the exact color choice your selected. This is certainly standard and with flexibility from you and a awesome contractor, youre going to get a fantastic completed product that is as attractive as a eye-catching piece of slate.
Any content, trademark’s, or other material that might be found on the CoolAt website that is not CoolAt’s property remains the copyright of its respective owner/s. In no way does CoolAt claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 CoolAt. All Rights Reserved.