Published at Wednesday, April 11th, 2018 - 18:20:52 PM. . By Carla Preston.
The next operation was using a hilt chipping hammer to remove all the concrete between the scores down ¾ of an inch so that the Cerlon can be poured at least ¾ of an inch thick. Only a ½” of Cerlon is needed to make the area impervious to the salt, but we figure that we go to ¾ of an inch to make sure the salt will not affect our repair. Once this is done and the spoilage is removed the concrete has to be cleaned and remove as much of the dust as possible. Cerlon will chemically bond with the concrete so you do not need to put any product as a bonding agent as you do with concrete.
Garage Floor Paints - Garage Floor paints very in quality and preparation methods of the concrete surface before application. As I stated in various other articles I am not a big fan of any of these products. I have yet to see even one of them that has lasted more than a year or two. Of course your slab has to be clean. It must be free of oil, grease, mud, sheetrock mud, paint, adhesives etc. The reason for the failures, for the most part, is the inadequate preparation of the concrete. For any paint or epoxy to achieve a proper bond to the concrete the pores in the concrete have to be \"opened up\". This can be achieved by the use of mechanical means, shot-blasting, scarifying and/or grinding. These methods are not really readily available to homeowners or DIYers.
Any content, trademark’s, or other material that might be found on the CoolAt website that is not CoolAt’s property remains the copyright of its respective owner/s. In no way does CoolAt claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 CoolAt. All Rights Reserved.