By Therese Joseph. Measuring Tools. Published at Monday, February 05th, 2018 - 12:38:52 PM.
There two major types of plastic pipe: the rigid and flexible forms. Depending on the type of plastic it is made of, rigid or firm pipes are used for hot and cold water systems. In order to cut rigid pipes, a hack saw can be used. Solvent cement can easily glue pieces together. A tube cutter that is used for flexible copper pipe is convenient for cutting rigid style plastic pipes. However a specialized blade is demanded - one that is meant for chopping plastic not cast iron or bronze metal.
hacksaw with a blade having 24 teeth per inch. In most codes, pipes and fittings of different plastic types must not be used within the same system. A home project involving the installation of a new sink might use chlorinated polyvinyl pipes (CPVC) for hot and cold water lines. Another type which is the polyvinyl chloride pipes (PVC) may be used for the drain line. Both are rigid pipes.
Preparation is Key to Installing Your Pergo Wood Floors - When you are getting ready to begin it is important to have everything you will need on hand. You will of course need the flooring, and the underlay. The underlay will help with moisture control and also gives you a barrier between the new floor and the old floor. This is very helpful in eliminating that echo sound you sometimes get from wood flooring. The tools you will need are a chop saw, a pull bar, measuring tape, and a mallet. One note, Pergo wood flooring is very hard so make sure that you have a good carbide blade in your chop saw, and the higher the tooth count on the blade, the smoother the cut.
Any content, trademark’s, or other material that might be found on the CoolAt website that is not CoolAt’s property remains the copyright of its respective owner/s. In no way does CoolAt claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 CoolAt. All Rights Reserved.