Published at Wednesday, December 06th, 2017 - 19:22:52 PM. . By Kerri Vargas.
Tools needed: FlexSet A push broom or blower Drill Trowel or Lute - First ensure that the damaged area is clean and dry. Sweep or blow out cracks so there is no loose debris. Using Roklins FlexSet Concrete Repair Product, carefully pour contents of bottle \"a\" into provided 5-gallon bucket then add special sand. Next, shake thoroughly and pour bottle \"b\" into sand mixture. Mix with a paddle-mixer, using a drill. When mixture is completely wet, pour FlexSet onto damaged area and use a trowel or lute to smooth material into cracks. When damage is sufficiently smooth, toss topping sand by hand over repaired area to create a uniform look and feel. Your driveway can be ready for vehicles in about an hour.
Garage Floor Paints - Garage Floor paints very in quality and preparation methods of the concrete surface before application. As I stated in various other articles I am not a big fan of any of these products. I have yet to see even one of them that has lasted more than a year or two. Of course your slab has to be clean. It must be free of oil, grease, mud, sheetrock mud, paint, adhesives etc. The reason for the failures, for the most part, is the inadequate preparation of the concrete. For any paint or epoxy to achieve a proper bond to the concrete the pores in the concrete have to be \"opened up\". This can be achieved by the use of mechanical means, shot-blasting, scarifying and/or grinding. These methods are not really readily available to homeowners or DIYers.
Any content, trademark’s, or other material that might be found on the CoolAt website that is not CoolAt’s property remains the copyright of its respective owner/s. In no way does CoolAt claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 CoolAt. All Rights Reserved.