By Kim Wong. Measuring Tools. Published at Saturday, February 24th, 2018 - 14:57:52 PM.
DIY Plumbing Working With Plastic Pipe - Home improvement is still possible under a tight budget when plastic pipes are used for plumbing needs. Whether old pipes need to be replaced or extended, its not a problem because plastic pipe can be connected easily even to a metal pipe system. They cost less, weigh less, and join effortlessly through the use of cement solvents. A hacksaw is all you need, some compression fittings and cement to create lasting waterproof joints.
A portable flow meter is a unit that has two clamps on it that attach to the pipe and send the signal. The portable flow meter will convert the information to the flow rate and total flow. By placing the transducers on the outside of the pipe, a portable flow meter is able to measure the flow without having to go into the pipe. This is a large advantage over the more invasive methods of having to cut into the pipe.
Plan and Begin laying Your Flooring - Now that you have everything you need, you are ready to begin. The first thing you need to do is remove everything from the room. If you are going over vinyl or linoleum you do not need to remove it, Pergo is only 9mm thick so you can easily go right over it. If you had carpet you will need to remove it and all the carpet tacks. Then sweep the floor and make sure all debris is removed. Make sure that you remove all base boards and door casing, this will allow you to make less cuts.
Any content, trademark’s, or other material that might be found on the CoolAt website that is not CoolAt’s property remains the copyright of its respective owner/s. In no way does CoolAt claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 CoolAt. All Rights Reserved.