Published at Sunday, April 08th, 2018 - 13:29:52 PM. . By Tina Solis.
Garage Floor Paints - Garage Floor paints very in quality and preparation methods of the concrete surface before application. As I stated in various other articles I am not a big fan of any of these products. I have yet to see even one of them that has lasted more than a year or two. Of course your slab has to be clean. It must be free of oil, grease, mud, sheetrock mud, paint, adhesives etc. The reason for the failures, for the most part, is the inadequate preparation of the concrete. For any paint or epoxy to achieve a proper bond to the concrete the pores in the concrete have to be \"opened up\". This can be achieved by the use of mechanical means, shot-blasting, scarifying and/or grinding. These methods are not really readily available to homeowners or DIYers.
The next step is mixing the Cerlon. This is done in 5 gallon buckets using the buckets that the Cerlon comes in take and pour ½ of the Cerlon in a clean bucket and mix the product half at a time. The most important part of mixing Cerlon is the ratio of water to the Cerlon has to be measured very accurately. A paddle on an electric drill that you use from mixing taping compound or floor leveler can be used to mix the Cerlon.
Any content, trademark’s, or other material that might be found on the CoolAt website that is not CoolAt’s property remains the copyright of its respective owner/s. In no way does CoolAt claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 CoolAt. All Rights Reserved.