Published at Thursday, March 29th, 2018 - 08:57:52 AM. . By Paige Mcconnell.
Exposing Technique: An aggregate in the concrete mix is exposed that gives beautiful finishing to the concrete slab. This is called exposed aggregate technique. This is done in three ways- sand blasting; chemical treatment; water pressure. This technique is used to create unique textured patterns.
Tools needed: FlexSet A push broom or blower Drill Trowel or Lute - First ensure that the damaged area is clean and dry. Sweep or blow out cracks so there is no loose debris. Using Roklins FlexSet Concrete Repair Product, carefully pour contents of bottle \"a\" into provided 5-gallon bucket then add special sand. Next, shake thoroughly and pour bottle \"b\" into sand mixture. Mix with a paddle-mixer, using a drill. When mixture is completely wet, pour FlexSet onto damaged area and use a trowel or lute to smooth material into cracks. When damage is sufficiently smooth, toss topping sand by hand over repaired area to create a uniform look and feel. Your driveway can be ready for vehicles in about an hour.
Any content, trademark’s, or other material that might be found on the CoolAt website that is not CoolAt’s property remains the copyright of its respective owner/s. In no way does CoolAt claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 CoolAt. All Rights Reserved.