Published at Wednesday, December 06th, 2017 - 04:01:52 AM. . By Marquita Sanford.
Mixing the Cerlon with the paddle causes heat to start to build up in the mixture. Heat causes the Cerlon to set. Using a heat gun you need to get the temperature up to about 80 to 90 degrees before you pour it into the area that needs to be repaired. Once it reaches 100 degrees you have only about 10 minutes to finish the patch with a trowel.
If the existing floor surface needs to be solidified and densified, the contractor might apply penetrating hardeners to the concrete. This usually happens after first stage of the grinding process. The hardeners can be used on both existing or new floors and react chemically with the concrete to result in a hard crystalline structure. In addition, the hardeners offer extra protection from staining and water penetration and also prevent the concrete dusting.
Any content, trademark’s, or other material that might be found on the CoolAt website that is not CoolAt’s property remains the copyright of its respective owner/s. In no way does CoolAt claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 CoolAt. All Rights Reserved.